Building pressure, temperature, humidity monitor
- All digital sensors;
- Updates every few seconds;
- All environmental data is automatically logged;
- Easy interface to PC over a Local Area Network;
- Print out or email logged data;
- No moving parts;
- Stores 2 years of logged data locally;
- Sensors stay in calibration for two years;
- Mounts directly on the wall or flush with the wall;
- Wired sensors w 25-foot wire (longer wired available);
The TV2 monitor is used in:
- Commercial Buildings;
- Art galleries;
- Computer rooms;
- Clean rooms;
- Testing labs;
The pressure, temperature and humidity data logged by the monitor can be downloaded to a computer either on demand or continuously so charts or numeric data may be printed out or saved to files proof of building safety.
Each environmental variable can be set with its own high and low point and delay time. Any variable which moves out of its set ‘safe’ range will turn red on the display and once the delay time is exceeded a local alarm will sound and text/email messages are sent. A phone call alert is also available.
What is Included
- One Quick-Check TV2 monitor for four sensors;
- One 5.2 vdc power supply the TV2 monitor;
- A wired Ethernet socket for CAT5 cable;
- An internal rechargeable 100-hr back-up battery for power failure protection;
- An optional 2-yr NIST traceable calibration certificate for each sensor;
- Free secure PC interface software;
- One year full warranty.
- Commercial buildings;
- Storage areas;
- Hospital storage closets;
- Laboratory environment;
- Clean rooms and areas;
- Animal laboratories;
- Forensics laboratories;
- Evidence rooms;
- Any humidity controlled area;
- Private residences.
Q. How accurate is the pressure sensor?
Q. How accurate is your temperature sensor?
A. Our TV2 temperature sensor is accurate to ±0.3°C.
Q. How accurate is your humidity sensor?
A. Our humidity sensors is accurate to ±3.0%.
Q. Do I need both a humidity and a temperature sensor?
A. No, the temperature sensor and humidity sensor are built into one module measuring 2″ x 2″ x 1″.
Q. Can I print out a log of temperature and humidity?
A. Yes, the logged data can be downloaded to a PC at any time and a color chart of conditions can be printed. In addition to printing out a chart of logged temperature and humidity the data can also be exported into an Excel file.
Q. Do I need technical help to install the TV2?
A. Not usually. If help is needed we can supply it via telephone, which is almost always sufficient. If you have a very large computer system your are integrating the TV2 into, you might need some help from your IT department.
Q. Can I see the current conditions on my phone or from my home computer?
A. Yes if you use port forwarding. You might need some technical assistance from your computer guys to do this.
Q. Does the TV2 monitor meet JCAHO, CAP, FDA requirements?
A. Yes. It meets and exceeds all requirements for monitoring temperature and humidity.
Q. How can I get the sensors further away from the monitor?
A. Our wired sensors which can be extended to hundreds of feet. We have fifty foot extension wires which an be daisy-chained together if needed. Sensors can be positioned up to 300 feet away from the modules.
Q. Do I mount the monitor in the office even though the sensors are in another area of the building?
A. Yes although we do not recommend mounting the sensors more than 200-feet away from the monitor.
Q. Do the sensors need to be plugged into wall power?
A. No. Each sensors is powered by the monitor?
Q. How often is the display updated?
A. Every three to four seconds.
Q. How often is data logged?
A. This can be set to any interval between once a minute to once a day. Each sensor can have its own data-logging interval. The default interval is once every 10 minutes.
Q. How safe is the logged data?
A. Logged data is stored in non-volatile memory in the monitor. It can also be automatically backed up to a computer.
Monitor, log and alarm building pressure!
Add additional sensors for temperature and humidity. Up to four sensors can be used with each monitor, one monitor can monitor and log two different rooms for pressure and temperature/humidity.
The TV2 monitor does much more than show the pressure, temperature and humidity. It also logs all data, storing over 2 years of data that can be accessed any time.
User training is a matter of minutes, requiring no special knowledge of computers of data loggers. All data can be displayed remotely on dashboards and accessed remotely with any browser.
No monthly fees or remote data storage. The TV2 monitor can be mounted in high traffic areas with complete safety. A two stage alarm alerts everyone to a potentially unsafe condition. Collect historical data automatically. Generate charts of logged data that can be printed or emailed to establish a history of safe building operation.