Care & User Guides for TV2, TV1, and Auto-dialers
- Users Guide for TV2 Systems
- Users Guide for United Securities Auto-dialers
PC Interface Software
Installing TV2 Systems and Auto Dialers
- Installing the TV2 with Wired Sensors
- Installing the TV2 with Wireless Sensors
- Linking wireless sensors to the TV2
- Installing an auto dialer with the TV2
- Clean Room Installation (panel mount template & construction guides)
- Quick Start guide for setting up the TV2 Clean Room Monitor
- Video on installing the TV2 with wireless sensors
- United Securities Auto Dialer User Guide and Installation manual
Setting up Email alerts
WiFi Setup app for TV2
This file should be unzipped. It is a .exe file and does not need to be installed.
To program the WiFi equipped TV2:
1. Plug the TV2 into a USB port on the computer where the WiFi setup app is located
2. Open the WiFi setup app
3. Scan USB ports and select the one the TV2 is plugged into
4. Select the Network SSID the TV2 is to be a part of
5. Enter the passphrase for the network
6. Click on Send (You should see some command in the dialogue box)
7. To select security protocol for the LAN click on the Advanced tab.
Documents on Calibration, Compliance, Credit, etc...
TV2 mounting options
Older material for ThermaViewer 1
- Prolific drivers for DB9 to usb converter (Only needed for very old versions of TView. Do not work with windows 10)
- ThermaViewer drivers for TView communications
- ThermaViewer 1 User Guide
TV2 Firmware and TView Software Security and Audit Trail Information
Application for Credit
Can’t find it? Search the site!
Call for Quote
(877) 241-0042 or (502) 243-0042